toggle
Home > Electrical > Relays & Power Distribution
Sort By:
Page of 2
Hella Micro & Mini Relay Socket Bracket Mount Connector Blocks Electromechanical Thermal Flasher Pre-Wired Relay Socket Harness

The sides of the blocks slide together to form a relay panel. The Mini 5 to 9 bracket will only mate to itself.
The Mini 5 bracket and the Micro 5 bracket can connect to each other as well as to themselves.
The brackets provide a cleaner, more professional look. Mounted base makes
changing relay easier and keeps relays together in one
location when multiple blocks are connected.

Electro-mechanical thermal flasher units are available in 2 or 3 pin configurations. Electro-mechanical
thermal flashers operate by using a bi-metallic strip and contact; allowing them to flash faster with
increased load. Thermal flashers do not conform to ADR13 and are only for turn
signals and other lighting in vehicles manufactured prior to 1990.

Pre-wired relay socket harnesses are pre-wired, can be wired directly into your vehicles harness,
and allows for easy installation and time savings. A relay socket harness will connect with
most 5 pin standard relays and change over relays. Molded base is a 5-pole socket.
5-Pin Molded Relay Socket Screw Terminal Blocks Stud Terminal Blocks - Zinc Plated Brass

A 5 pin molded relay socket is a relay base that can be used with most standard and change
over relays. Simply insert 4 or 5 pre-wired terminals into the housing and wire the bases
directly into your vehicle's harness. Relay socket bases are made of durable,
impact resistant materials to sustain a long lifespan. Terminals included.

Screw terminal blocks provide a common area to join positive or negative, AC or DC connections with
each circuit being independent or non-bussed. The bars are thermoplastic that have
copper screw connections and come in lengths of 2 to 12 gangs.

Stud terminal blocks provide the ability to join positive or negative, AC or DC connections and are rated
up to 30 amps. The studs are directly molded into the base enabling them to withstand 25 inch-pound
of torque for a solid tight fit. They are thermoplastic plastic bars that have brass stud connections
and come in lengths of 2 to 14 gangs. Each circuit is independent or non-bussed.
Stud Terminal Blocks - Zinc Plated Steel Blue Sea Systems Terminal Blocks & Jumpers ISO Ultra Micro Relays

Stud terminal blocks provide the ability to join positive or negative, AC or DC connections and are rated
up to 30 amps. The studs are directly molded into the base enabling them to withstand 25 inch-pound
of torque for a solid tight fit. They are thermoplastic plastic bars that have brass stud connections
and come in lengths of 2 to 14 gangs. Each circuit is independent or non-bussed.

Blue Sea Systems fully insulated independent terminal blocks are used to isolate circuits. Each screw pair
is one isolated circuit. Terminal block jumpers allow the creation of common circuits. Closed back design
completely insulates power from the mounting surface. Terminal block jumpers are made of
nickel-plated brass and have a continuous amperage of 65A, same as the block.

This ultra micro ISO automotive relay features a built-in resistor. While the relay permits a low
current flow circuit to control a high current flow circuit, the internal resistor
protects sensitive equipment against voltage spikes.
5 Pin Relays 12 Volt 30/50 Amp Relay w/o Mounting Bracket 12 Volt 30/50 Amp Skirted Relay w/ Resistor & Bracket

A 5 pin relay is a remote control electronic switch normally controlled by another switch, computer
or control module. Functioning as a standard 12 volt and 24 volt replacement or addition for full
voltage, these relays are a great option for equipment existing in vehicles today. The mounting bracket
included with the 5 pin relays allows for the relay to be mounted directly to a vehicle or other electrical
application. This 5 pin relay is an optimal solution for full voltage applications on a variety of vehicle
equipment including head lamps, auxiliary lamps, fog horns, motors for fans,
window lifters, air conditioners, heated rear windows, and more.

Relays allow a low current flow circuit to control a high current flow circuit. This relay is a standard
replacement or addition for full voltage on equipment existing in vehicles today. This relay
does not have a mounting bracket and is designed to easily fit within standard fuse boxes.

A skirted relay allows a high current flow circuit to be controlled by a low current flow circuit.
The internal resistor protects against voltage spikes and the skirt connects with the
sealed OEM connector in the vehicle. The best solution for full voltage applicable
to head lamps, auxiliary lamps, fog horns, motors for fans, window lifters,
air conditioners, heated rear windows, or the myriad of other
equipment existing on vehicles today.
Relay w/ Resistor 12 Volt 30/50 Amp ISO 280 Relay w/ Resistor ISO 280 Micro Relay w/ Resistor

These relays feature a built-in resistor and will fit within a standard fuse box. While the relay permits
a low current flow circuit to control a high current flow circuit, the internal resistor
protects sensitive equipment against voltage spikes.

This ISO 280 relay has smaller .187" terminals that will fit most Mini fuse boxes.
To ensure long life, the relay features an internal resistor that provides
protection to sensitive equipment against voltage spikes.

Micro relays are a smaller ("micro") version of a standard relays and feature an ISO 280 footprint that
will fit within common Mini (ATM) fuse boxes. The ISO 280 footprint relates to the pin size and
arrangement of the relay. This micro relay is a changeover relay with a five pin configuration.
A built in resistor to protect against voltage spikes is also featured in this relay. Additionally,
with its small size, this micro relay is a great space savings solution.
Relay & Socket Harness Kit Relay w/ Diode 12 Volt 30/50 Amp Potted Relay w/ Resistor - 12 Volt 30/50 Amp

This is a complete relay and socket harness, allowing for easy installation and time savings.
This relay and harness kit can be spliced directly into a vehicle's harness.
The socket is manufactured with 14 gauge wire leads,
and the ISO relay features a mounting bracket.

The Relays allow a low current flow circuit to control a high current flow circuit. They are remote
control electronic switches that are normally controlled by another switch, computer or control
module. The internal diode within this relay protects sensitive equipment against voltage spikes.
The lack of a mounting bracket on the relay allows an easy fit within standard fuse boxes.


Potted relays have the protection needed for marine applications and vehicles that are in harsh
environments. The relay is potted, meaning it is sealed for dust and moisture resistance,
while the internal resistor acts to protect against voltage spikes.
Flux Tight Relay - 12 Volt 30/50 Amp Normally Open Relays Electromechanical Flasher

Flux tight relays are sealed for dust and moisture resistance, have tinned terminals, and are ideal
for marine applications. Flux tight relays feature an internal resistor to protect against
voltage spikes, maximizing the life of the relay.

Normally open relay can be mounted onto a vehicle or other electrical application.
The relay allows for circuits up to 70 amps at 12 volts DC.


The Dual 87 Contacts Relay allow for two circuits to be activated simultaneously and allow the
operation of
two instruments. This type of normally open relay is popular for European cars.

Electro-mechanical flasher units are available in 2 or 3 pin configurations. Electro-mechanical flashers
are specifically designed for controlling the flash rate of vehicle directional indicators. They are
non-polarized and non -load sensitive, which means that are only suitable for vehicles
manufactured prior to 1990 as they do not conform to ADR13.
Junction Blocks Stud Type Junction Block - Feed-Through Mount Quick Connect Power Distribution Blocks - Dual 1 to 4

These stud type standalone junction blocks are designed for surface mounting and provide
a common area for heavy duty positive or negative connections within a vehicle.
Stud type junction blocks are available in 1 or 2 stud
configurations with 1/4", 5/16" & 3/8" studs.

A stud type, feed-thru junction block is ideal for firewall mounting on a panel and is designed to transfer
power from the engine compartment to the driver compartment. It is made with zinc-plated
brass studs and of durable thermoplastic insulation.


A dual 1 to 4 quick connect power distribution block acts as a location for distributing power to multiple
accessory loads. The block is a 2 pole connection with two isolated inputs and four outputs each.
Designed for surface mounting and is rated to 70 amps at 600 volts.

Junction Box - Stud Type - Plastic Junction Block - 8 Point Screw Connect Power Distribution Blocks - Single 1 to 4

This stud type, plastic junction box provides a common area to join your trailer wire or cable connections.
Each junction box has seven tin-plated copper stud connections that are independent or non-bussed.
The unit comes with a gasket and five open and closed rubber grommets for wire or cable
inlets/outlets to provide moisture and dust resistance.

An 8 point power distribution block is a 3⁄8" post that has eight connection screws. This distribution
block is designed for conveying power from one main connection. The base material
insulates the power junction and allows for easy surface mounting.

A single 1 to 4 power distribution block has a 2 pole connection with two isolated inputs and four outputs.
The block is rated up to 175 amps at 600 volts and can be easily surface mounted.
This power distribution block provides a convenient location to
distribute power to multiple accessory loads.
Wig Wag Flasher Relay Hella ISO Mini & 280 MINI Weatherproof Relay Connectors Hella Mini ISO Relays w/ Fuse

Wig wag flashers, or alternating flashers, control the flash rate of your vehicle's directional signal
in a side to side flash pattern. Wig wag flashers are solid state devices and are most commonly
used in police and other emergency type vehicles. They are easy to install and allow the
necessary warning patterns needed for ample warning to other drivers.

Mini weatherproof relay connectors are available for ISO and 280 Mini relays.
Manufactured with 12" leads of red 12 gauge and black and blue 18 gauge wire.
86: Black wire, power in. 85: Dark blue wire, ground. 30: Red wire, accessory power.
87/87a: Red wire, switched accessory power.

These Mini ISO relays feature a built-in 15A or 25A ATO / ATC fuse. The SPST, normally open relays
have a continuous rating of 15A or 25A. The built-in fuse bracket eliminates the need for a
separate fuse holder, saving both space and materials. Both models have a mounting
bracket and are rated to 10,000,000 mechanical cycles.