toggle
Home > Hardware > MISC Hardware
Sort By:
Page of 2
3-5/8" Locker Hook - Zinc Plated Steel 2-5/8" Locker Hook - Zinc Plated Steel Rubber Bumper Cone Style

Locker Hook - Zinc Plated Steel

3-5/8" Overall Length - 2" Hook

Locker Hook - Zinc Plated Steel

2-5/8" Overall Length - 1-5/8" x 1-1/8" Hook

Rubber Bumper - Black

1" Diameter - 1-1/2" Height
3-1/4" Toggle Switch Cup - Aluminum Rubber Bumper w/Washer Rubber Bumper w/Washer

Toggle Switch Cup - Aluminum

3-1/4" Diameter - 2" Inner Diameter - 1" Height

Elastomer Bumper w/ Washer - Black

1-1/2" Diameter - 3/4" Height

Rubber Bumper - Black

2-1/2" Diameter - 1" Height
Switch Cup - 4 Knockouts - Black Plastic Lid Stays - Zinc Plated Steel Plastic Print Pocket

Switch Cup - 4 Knockouts - Black Plastic

4-1/2" x 3-1/4" x 1"

Lid Stays - Blue Zinc Plated Steel

8-1/8" Overall Length - 4-1/2" x 5-1/4" x 5/8"

Left and Right Side Stays Available

Small Print Pocket - Grey Polystyrene

6-1/2" x 6-5/8" x 1"
Double Ended Snap - Nickel Plated Double Ended Snap - Nickel Plated 3-1/2" Swivel Eye Snap - Nickel Plated

Double Ended Snap - Nickel Plated Steel

3-5/8" Overall Length - 3/8" Snap Opening

Double Ended Snap - Chrome Plated Steel

4" Overall Length - 3/8" Snap opening

Swivel Eye Snap - Nickel Plated Steel

Available in different sizes.
Open End Snap - Zinc Plated 3-1/2" Fixed Eye Snap Hook - Nickel Plated 3-1/2" Open End Snap - Die Cast Zinc

Open End Snaps - Zinc Plated Steel

Several Sizes Available

Fixed Eye Snap Hook - Nickel Plated Steel

3-1/2" Overall Length - 3/4" Eye Diameter - 1/2" Snap Opening

Open End Snap - Die Cast Zinc

3-1/2" Overall Length - 7/16" Snap Opening - 5/16" Hook Opening
3-1/4" Swivel Eye Snaps - Nickel Plated 3-1/8" Teardrop Snap - Zinc Plated Steel 4" Double Ended Snap - Chrome Plated

Swivel Eye Snaps - Nickel Plated Steel

3-1/4" Overall Length - 3/8" Snap Opening

3/4" and 1" Wide Swivel Eye Available

Teardrop Snap - Zinc Plated Steel

3-1/8" Overall Length - 1-1/2" Width - 3/8" Snap Opening

Double Ended Snap - Chrome Plated Steel

4.81" Overall Length - 2/5" Snap opening
3-1/2" Fixed Eye Snap Hook - Nickel Plated 3-1/2" Fixed Eye Snap Hook - Nickel Plated 3-1/4" Spring Loop Snaps - Nickel Plated

Fixed Eye Snap Hook - Zinc Plated Steel

3.750" Overall Length - .750" Eye Diameter - .590" Snap Opening

Swivel Eye Snap Hook - Nickel Plated Steel

4" Overall Length - .875" Eye Diameter - .590" Snap Opening

Spring Loop Snaps - Nickel Plated Steel

3-1/4" Overall Length - 1/4" Spring Loop Diameter

3/4", 1", and 1.5" Wide Square Eye Available
Table Braces - Zinc Plated Steel WD-40® SMART STRAW® Stainless Steel - Louvered Vent

Table Braces - Zinc Plated Steel

12-1/2" Overall Length - 5-1/2" x 7" x 5/8"

1" x 3/4" Table Base

Left and Right Side Braces Available
  • PERMANENTLY ATTACHED SMART STRAW
  • SPRAYS 2 WAYS
  • FLIP UP FOR STREAM, DOWN FOR SPRAY
  • THOUSANDS OF USES


WD-40 Multi-Use Product lubricates moving parts such as hinges, wheels, rollers, chains, and gears. It protects against rust and corrosion on items like tools, and sporting equipment. It penetrates to free stuck corroded parts like nuts, bolts, valves and locks. It quickly removes adhesives, corrosion and paint. It displaces moisture to restore water flooded equipment such as engines, spark plugs and power tools.

Louvered Vent - 5" x 6"

Stainless Steel
Plastic Print Pocket 3-1/8" Teardrop Snap - Polished Stainless Steel Drawer Slides

Large Print Pocket - Grey Polystyrene

10" x 9-3/8" x 1"

Teardrop Snap - Polished Stainless Steel

3-1/8" Overall Length - 1-1/2" Width - 5/8" Snap Opening

Standard Drawer Slides - Pair

100lb Weight Rating at Full Extension
Performance Polyurethane Component - Sway Bar Bushing Backdraft Damper / Wall Shutter - 12-1/2" x 12-1/2" Opening Required Backdraft Damper Wall Shutter

Performance Polyurethane Component

• Energy's HYPER-FLEX Polyurethane is formulated for its
specific purpose (different hardnesses for different applications).
• Impervious to Gas, oils and other petroleum products. • Will not rot
or deteriorate from smog, ozone, road salts, etc. • Soft enough
for a smooth ride and yet firm enough for the most demanding driver.
• Improved handling & control for street, track, & off-road. • Better-than
new performance. • Increased durability that outlasts O.E. parts.
• The best upgrade money can buy.

12" Backdraft Damper / Wall Shutter, 12-1/2" x 12-1/2" Opening Required

G-90 Galvanized Steel Frame and Tie Rods - For Use With: Vertical Mounted Exhaust Fans

Max Velocity: 2000 FPM - Vertical Mounting Position - Blade Material: Mill Finish Aluminum

Frame Depth: 2-1/4" - Open Depth: 6-1/4" - Flange Width: 1-1/2"
- Shutter Free Area: 0.791 sq. ft. -
#2C518C

Exhaust Shutter - Gravity Operated - Single Panel - Fits Fan Dia 12" - Opening Required 12-1/2" X 12-1/2"

Blade Material Mill Finish Aluminum - For Use With Vertical Mounted Exhaust Fans

Max Velocity 2500 FPM -
Extruded Aluminum Frame - Galvanized Tie Rods

15" Length x 15" Width x 3" Height
- 3HHN5