toggle
Home > Fittings > Brass Fittings
Sort By:
Page of 2
Brass Short Milled Flare Nut Brass Locknut Brass Sealing Plug
  • Short flare nut for connecting to a tube or fitting
  • Connects to copper, brass, aluminum, or steel tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Resists mechanical pullout for a more secure connection
  • Locknut for locking two threaded fittings into place for increased stability
  • Female FPT threads for connecting to male threaded pipes
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Sealing plug fitting
  • Hex shape on one end and flare on the other end
  • Connects to copper, brass, aluminum, or steel tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Compression Sleeve Brass Half Union - Flare x Male Pipe Thread Brass Sealing Cap Nut
  • Includes 10pc per pack
  • Sleeve for a tube compression fitting
  • Connects to copper, brass, aluminum, or plastic tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • No flaring tool required for assembly
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Resists mechanical pullout for a more secure connection
  • FPT thread on one end
  • Cap nut
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Brass Female Coupling - Flare x Female Pipe Short Forged Flare Nut Brass Reducing Union Compression x Compression
  • Coupling fitting for connecting two tubes with the same diameter
  • Flared tube connection on one side and a female NPT connection on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Short forged flare nut for connecting to a tube or fitting
  • Connects to copper, brass, aluminum, or steel tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Resists mechanical pullout for a more secure connection
  • Reducing union to connect two tubes of different diameters
  • Flared tube connections on both ends
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Resists mechanical pullout for a more secure connection
Brass Compression Tee Brass Barb Union Short Forged Reducing Nut
  • Three piece construction - nut, sleeve and body with attached insert
  • Use with copper, brass, aluminum, or plastic tubing
  • Standard fittings use short nuts
  • Easy to disassemble no flaring tool required
  • Primary uses water, gasoline, oil and vacuum lines
  • Union coupling for connecting two hoses with the same diameter in a straight run
  • Connects to a hose on both ends
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Barbed fitting for a tight seal on hoses
  • Short forged reducing flare nut for connecting to a tube or fitting
  • Connects to copper, brass, aluminum, or steel tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Resists mechanical pullout for a more secure connection
Brass Reducing Union Compression x Compression Brass Union Coupling - Compression x Compression Swivel Coupling - Female Hose x Female Hose
  • Reducer three piece construction - nut, sleeve and body with attached insert
  • Use with copper, brass, aluminum, or plastic tubing
  • Standard fittings use short nuts
  • Easy to disassemble no flaring tool required
  • Primary uses water, gasoline, oil and vacuum lines
  • Union for connecting and disconnecting two tubes more easily than with a coupling
  • Compression tube connections on both ends
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Three piece construction - nut, sleeve and body
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Union connects GHT thread to GHT
  • Includes black rubber gasket
  • For moderate flow water systems
Brass Union Coupling - Compression x Compression Brass Elbow - Male Pipe Thread x Compression Swivel Coupling - Female Hose x Female Pipe
  • Three piece construction - nut, sleeve and body with attached insert
  • Use with copper, brass, aluminum, or plastic tubing
  • Standard fittings use short nuts
  • Easy to disassemble no flaring tool required
  • Primary uses water, gasoline, oil and vacuum lines
  • Three piece construction - nut, sleeve and body with attached insert
  • Use with copper, brass, aluminum, or plastic tubing
  • Standard fittings use short nuts
  • Easy to disassemble no flaring tool required
  • Primary uses water, gasoline, oil and vacuum lines
  • Swivel adapter for connecting hose or fittings of different types
  • Connects to a male GHT on one end and swivel connector on one end
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Brass Union Coupling - Flare x Flare Brass Bushing Brass Compression Nut - 10 Pack
  • Union for connecting and disconnecting two tubes more easily than with a coupling
  • 45-degree flare head tube connection on both sides
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Resists mechanical pullout for a more secure connection
  • Hex bushing for connecting two pipes or with different diameters
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Nut for connecting to a tube or fitting
  • Connects to copper, brass, aluminum, or steel tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Resists mechanical pullout for a more secure connection
Brass Fitting Barb Tee Brass Hose Barb Connector x Male Pipe Thread Brass Elbow - Flare x Flare
  • Branch tee to connect hose
  • Fitting connects to hose on all ends
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp
  • For use with plastic or rubber hose
  • Barb adapter for connecting a hose to a male threaded connection of a different diameter
  • Hose barb on one end and male NPT threads on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeabilit
  • Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads
  • 90-degree elbow for connecting two pipes or tubes at an angle
  • 45-degree flared construction for a stronger connection than soldered
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Suitable for copper, brass, aluminum, and steel tubing
Brass Elbow - Flare x Male Pipe Thread Brass Flare Tee Three Ends Brass Swivel Connector Garden Hose - Barb x Female Hose
  • Flare tee with three openings for connecting and branching three pipes
  • Fitting connects to tubing on all three, flared ends
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flared construction for a stronger connection than soldered
  • Includes black rubber gasket
  • Adapter for connecting hose or fittings of different types
  • Connects to hose on one end and a barb thread connection on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Brass Elbow Compression x Compression Brass Elbow - Compression x Female Pipe Brass Elbow - Flare x Female Pipe
  • 90-degree elbow for connecting two tubes at an angle
  • Compression connection on both ends
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Three piece construction – nut, sleeve and body
  • Three piece construction - nut, sleeve and body with attached insert
  • Use with copper, brass, aluminum, or plastic tubing
  • Standard fittings use short nuts
  • Easy to disassemble no flaring tool required
  • Primary uses water, gasoline, oil and vacuum lines
  • 90-degree elbow for connecting two pipes or tubes at an angle
  • 45-degree flare connection on one end and an NPT female connection on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability